Stevia GB by Synthoholic
Oscillator 1 timbre
Both sawtooth and square oscillators are enabled.
Pulse width of square oscillator is manually set to 100% (50% is perfectly square, 100% is very short pulsewave).
Oscillator 2 timbre
Volume level for oscillator 2 is manually set to 190.
Tone for oscillator 2 is off.
Volume (VCA) volume
Amplification level is set to 0.07dB (171) and is modulated by VCA Env.
VCA Env direct modulation amount for amplification level is 255.
Pan spread is manually set to 47.
Noise timbre
Noise level is manually set to 46.
High-pass filter (HPF) timbre
High-pass filter cut-off frequency is manually set to 133.22Hz (105).
Low-pass filter (VCF) timbre
Low-pass filter cut-off frequency is set to 134.14Hz (42) and is modulated by Note Vel, LFO 2, VCF Env.
LFO 2 direct modulation amount for low-pass filter cut-off frequency is 22.
VCF Env direct modulation amount for low-pass filter cut-off frequency is 149.
Low-pass filter envelope amount is modulated by Note Vel, Note Num.
Note Vel direct modulation amount for low-pass filter envelope amount is 22.
Note Num direct modulation amount for low-pass filter envelope amount is 200.
Filter resonance is statically set to 55% (142).
Oscillator 1 pitch pitch
Oscillator 1 pitch modulation is modulated by Mod Wheel.
Mod Wheel mod-matrix 1 modulation amount for oscillator 1 pitch modulation is 10.
FX routing & levels fx
FX mode is set to Send, and routing is
Effect 1 level is manually set to 0. Effect 2 level is manually set to 100. Effect 3 level is manually set to 100. Effect 4 level is manually set to 100.
Multi-Band Distortion fx
not yet complete
Reverse Reverb fx
not yet complete
Rack Amplifier fx
not yet complete
Auto-Panning fx
not yet complete
Mod Wheel modulator
Controls OSC 1 Pitch Modulation Depth.
| function | type | destination | amount |
|---|---|---|---|
| pitch | matrix | OSC 1 Pitch Modulation Depth | 10 |
Note Num modulator
Controls VCF Keyboard Tracking.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Keyboard Tracking | 200 |
Note Vel modulator
Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader-indirect | VCF Cut-off Frequency | 149 |
| menu | VCF Envelope Velocity Sensitivity | 22 |
LFO 2 modulator
Controls VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 22 |
| name | value |
|---|---|
| LFO 2 Rate | 0.04Hz (0) |
| LFO 2 Delay / Fade | 0s (0) |
| LFO 2 Shape | Triangle |
| LFO 2 Key Sync | off |
| LFO 2 Arp Sync | off |
| LFO 2 Mono Mode | 0 |
| LFO 2 Slew Rate | 0 |
VCA Env modulator
Controls VCA Gain for All Voices.
| function | type | destination | amount |
|---|---|---|---|
| volume | menu | VCA Gain for All Voices | 255 |
| name | value |
|---|---|
| VCA Envelope Attack Time | 0s (0) |
| VCA Envelope Decay Time | 1.72s (168) |
| VCA Envelope Sustain Level | 37% (95) |
| VCA Envelope Release Time | 1.69s (166) |
| VCA Envelope Trigger Mode | Key (0) |
| VCA Envelope Attack Curve | 0 |
| VCA Envelope Decay Curve | 59 |
| VCA Envelope Sustain Curve | 93 |
| VCA Envelope Attack Curve | 51 |
VCF Env modulator
Controls VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 149 |
| name | value |
|---|---|
| VCF Envelope Attack Time | 0s (0) |
| VCF Envelope Decay Time | 1.72s (168) |
| VCF Envelope Sustain Level | 37% (95) |
| VCF Envelope Release Time | 1.69s (166) |
| VCF Envelope Trigger Mode | Key (0) |
| VCF Envelope Attack Curve | 0 |
| VCF Envelope Decay Curve | 59 |
| VCF Envelope Sustain Curve | 93 |
| VCF Envelope Attack Curve | 51 |